Historical models – for Pointe-à-Callière museum of Montreal

5 HISTORICAL MODELS FOR THE POINTE-À-CALLIÈRE MUSEUM OF MONTREAL

nbfhjnfg

OVERVIEW:

Completion date: 2018/2019
Completion time: 13 months
Scale: 1/50 for the first one and 1/100 for the others
Dimensions: 5 models of 11 ′ x 11 ′
Materials: Polystyrene | Plywood | Sand | Vegetation | Vegetable foam | Clay for characters

hghgfjf

DESCRIPTION:

This project brings together five large-scale models retracing the evolution of the Pointe-à-Callière museum site in Montreal between the 14th and 19th centuries. From the native occupation to the expansion of the city in the 19th century, including the development of the village that Montreal was at the time. The models are realistic and include all the archaeological and anthropological knowledge related to the different eras. They are now installed and visible in the floors of the museum basement in a permanent exposition.The first model was produced on a scale of 1:50 to reflect the life scenes of the figures in clay, handmade, in accordance with knowledge of the time.
The following four models have been represented at 1: 100 to account for the historical evolution of life in the district since the arrival of the first Europeans.

As all the models were commissioned by the museum, it was therefore necessary to pay great attention to the conformity of the representation with the historical data. This concerns not only the illustration of scenes of life, the appearance of buildings, animals, but also of natural spaces.
In particular, it was necessary to respect the aspect of the water and the direction of the current, as well as the vegetation present at the time in order to represent the various scenes in a realistic way, from falling of trees, fishing, drying of salmon, hunting, to construction of buildings to the ornated architecture we now recognize as old Montreal.

Sainte-Catherine – condo tower project in Montreal

SAINTE-CATHERINE – A CONDO TOWER PROJECT IN THE HEART OF MONTREAL

OVERVIEW:

Completion date: 2020
Completion time: 3 weeks
Scale: 1:87
Dimensions: 16” x 16” x 28”
Materials: Acrylic | MDF base

DESCRIPTION:

The condo tower project is located in Montreal, on Sainte-Catherine shopping street, in the heart of the city. The model produced in 2020 enriches a personal collection. His execution lasted 3 weeks. Its overall dimensions are approximately 16 “x 16″ for a height of 28”.
The model was completed at a scale of 1:87. This scale allows you to enter a precise and rich level of detail, while allowing the representation and understanding of the concept of the project as a whole. The major challenge was to transcribe the two architectural principles of the project, particularly the large glass curtain facades in the upper residential part, and the commercial base in the lower part. It was therefore necessary to think of the realization of the upper part with the fewest possible joints, to work the assembly of the floors with these continuous facades while considering the staggering of the floors in order to best represent the concept.
The whole model is monochrome and was made in acrylic, white for the opaque elements, and sandblasted transparent to create the translucent aspect of the tower’s glazing. All the elements were first drawn digitally then engraved and cut by laser cutter before being manually assembled.
The tower is placed on a base representing, the immediate urban context. Everything is protected by a transparent acrylic cover. The model is built on a base of MDF on which the urban context is expressed through styrene and the integration of characters. The lighting is centrally positioned throughout the height of the tower so that it is evenly illuminated.

1500 Maisonneuve – a condo tower project in Montreal

1500 MAISONNEUVE – A CONDO TOWER PROJECT IN THE HEART OF MONTREAL

OVERVIEW:

Completion date: 2020
Completion time: 3 weeks
Scale: 1:87
Dimensions: 32 ″ x 36 ″ x 41 ″
Materials: Acrylic | MDF base | Styrene

DESCRIPTION:

The condo tower project is located on Maisonneuve Street, in the heart of the city of Montreal. The model produced in 2020 enriches a personal collection.  Execution time for the model was 3 weeks. Its overall dimensions are approximately 32 “x 36″ for a height of 41”.The model, was produced at a scale of 1:87. This scale allows a refined level of detail, while allowing the representation and understanding the concept of the project as a whole. The upper part of the project is intended for housing while the first floors are dedicated to accommodating a commercial program. One of the challenges of the representation of the project the realization of the guardrails surrounding all the residential floors. It was necessary to ensure the regularity of the facade despite the great diversity of floor levels in the project.
The whole model is monochromatic and was made in acrylic, white for the opaque elements, and sandblasted transparent to create the translucent aspect of the tower’s glazing. All the elements were first drawn digitally then engraved and cut by laser cutter before being manually assembled.
The tower is placed on a monolithic base representing, in the form of simple volumes, the immediate urban context. Everything is protected by a transparent museum grade acrylic cover. The model is built on a base of painted MDF and the urban context is expressed through styrene and the integration of characters. The lighting is centrally positioned throughout the height of the tower so that it is evenly illuminated evenly as a whole.

Corby House – individual property owner project

CORBY HOUSE – INDIVIDUAL PROPERTY OWNER PROJECT

OVERVIEW:

Completion date: 2017
Completion time: 4 weeks
Scale: 1:87
Dimensions: 24” x 18” x 15”
Materials: Russian plywood | Acrylic | Linden tree | Birch veneer

DESCRIPTION:

The Corby house project was carried out for an individual property owner in 2017. The realization of this completely handmade model took 4 weeks.
The model, all of which is fixed, is at a scale of 1:87. This scale made it possible to achieve a rich and precise level of detail, both in terms of the representation of textures in facade and the surroundings. One of the major challenges of this model was the integration of the elements into the slope of the surrounding streets.
Particular attention was given to the representation of the moldings, as well as to the wrought iron elements, and to the integration of the characters.
The entire model was made of basswood on a Russian plywood base on which the landscaping and urban context are expressed through birch veneer. Only the windows were represented by transparent acrylic, to allow the integration of a lighting.

BNC competition model – Sid Lee Architecture

BNC COMPETITION MODEL – SIDLEE ARCHITECTURE

HGFHNF

OVERVIEW:

Completion date: 2018
Completion time: 2 weeks
Scale: 1:500
Dimensions: 90cm X 90 cm
Materials: Russian plywood | Acrylic | Linden tree | Birch veneer

HGFJF

DESCRIPTION:

This model is part of a set of pieces presented in the architectural competition for the National Bank building in Montreal near Bonaventure station. The model manufactured in 2018 required 2 weeks of execution.
The project is represented on a scale of 1/500 in a large urban context. It was above all to highlight the reflection of the project in its context. The building presented to the competition is thus represented in acrylic, and those surrounding in basswood, simplified and in a schematic manner.
The facades of the main building were made by laser cutting the pattern from acrylic sheets. It was important for this second skin to let light pass through since the model is equipped with a lighting device to showcase the project.

Canadian High Arctic Research Station (CHARS)

PRESENTATION MODEL FOR THE CANADIAN HIGH ARCTIC RESEARCH STATION (CHARS) BY N.O.F.E. AND FGMDA ARCHITECTS.

 

OVERVIEW:

Date of completion : 2014
Time for completion : 8 to 10 weeks
Scale 1 : 100
Dimensions : 30″ x 48″ x 9″
Materials : Linden Wood | Styrene | Acrylic | Russian birch plywood | LED lighting

 

DESCRIPTION:

The CHARS project is located in Nunavut. The consortium N.F.O.E. and FMGDA commissioned this model for the presentation of the project. It was built in 2014 and its execution lasted between 8 to 10 weeks. The model’s approximate dimensions are 30 x 48 inches for an overall height of 9 inches.

First, the chosen scale of 1:100 allows to see the partitions of the interior spaces, the treatment of the facades and the exterior development of the site. The model presents four buildings, two smaller residence buildings and two others of larger proportions dedicated to research. Then the outdoor spaces are represented in a more abstract way using tubular structures and landscaped with a play on ground levels.

Three types of materials were employed for this model. On the one hand, styrene type plastic was used for building envelopes and the interior layouts. It was chosen because of its aesthetic and its ability to convey colors accurate to construction. On the other hand, clear acrylic, sanded, was used to represent glazing on buildings and linden wood was employed for simple details. Then, in order to make the model most realistic, the building envelopes were treated and painted to imitate construction materials that would be used on site.

The model was built on a Russian birch plywood of 1,5 inch depth over which landscaping was expressed with sheets of white styrene which reminds of a snowy ground. Layers of multiple sheets of one sixteenth of an inch represent the topographic levels of the site where small characters to scale enliven the model. Finally, the model is equipped with a LED lighting system integrated to its base.

See built project at: CHARS

 

Model Terminal Park Avenue Audi - Entrance detail

Terminal Type Car Dealership – Park Avenue Audi in Brossard

PRESENTATION MODEL FOR A NEW AUDI TERMINAL ON THE SOUTH SHORE OF MONTREAL.

 

OVERVIEW:

Date of completion : 2014-2015
Time for completion : 8-10 weeks
Scale 1 :87
Dimensions : 24″ x 40″x 14″
Materials : Styrene | Acrylic | Metal Grating | Russian Birch Plywood | Plants | LED Lighting

 

DESCRIPTION:

The Terminal Park Avenue Audi project is located in Brossard. This model was created to present the project of a new terminal type car dealership to Audi Canada. The model was made between 2014 and 2015 and its execution lasted from 8 to 10 weeks.  Its overall dimensions are approximately 24 x 40 inches.

First, the model is on a scale of 1:87, an industry standard (ho) because, this allows to have access to many quality accessories. Then, the entire model is generally opaque with some parts of translucent glazing so only the showroom is visible from the outside. Then, the cars, the furniture and the other main elements are expressed in order to give the most realistic and faithful reading of the project.

Two types of materials were chosen for this model. On the one hand, the styrene, which constitutes the entire envelope, for its plastic qualities and its ability to retransmit colors faithful to those of the construction. On the other hand, acrylic, in opaque version for the floors and the roof and in clear transparent version or sanded for the glazing. In addition, to give the model a realistic appearance, the envelope is textured and painted and a wire mesh is mounted on the styrene panels.

The model is built on a base of Russian birch plywood on which the landscaping and urban context are expressed with cherry wood veneer or painted styrene and a mixture of moss and dried flowers. Unlike a standard lighting strategy by the base, the lighting is positioned in the upper part of the model to allow downlighting. Finally, this design allows the visible interior space to be lit in a realistic way.

The model is protected by a transparent acrylic case. To see an article about the completed project :affairesautomobiles.ca

Bota-Bota Spa on the Water Model - Side view

Bota-Bota Spa on the Water by Sid Lee Architecture

PRESENTATION MODEL FOR THE BOTA-BOTA SPA ON WATER, A PROJECT BY SID LEE ARCHITECTURE.

 

OVERVIEW:

Date of completion : 2009
Time for completion : 4-6 weeks
Scale 1 :100
Dimensions : 24″ x 10″ x 10″
Materials : Styrene | Acrylic | Linden Wood | Russian Birch Wood

 

DESCRIPTION:

The Bota-Bota project is located in the Old Port of Montreal. Its design was entrusted to the Montreal firm Sid Lee architecture. The model was commissioned by the architects to present the project to their client and to demonstrate the relationships between floors, spaces and functions. This model was made in 2009 and its execution lasted between 4 and 6 weeks. Its overall dimensions are approximately 24 x 10 x 10 inches.

First, for the purposes of the presentation, the model was designed to be manipulable and removable. Its scale of 1: 100 allows a good level of detail. The construction strategy employed makes it possible to see partitions, counters and circulations in order to understand the relationships and layout of the different sectors. The hull of the boat was obtained by thermo-molding while the walls were laser cut to control the accuracy of the openings. Then, to allow a perfect alignment of the different floors during the reassembly of the model, the vertical circulations were fixed as anchoring cores.

The main material for this model is styrene plastic. It was chosen for its plastic qualities and its flexibility when heated which allows simple curvatures, and for its ability to retransmit colors true to those of the final construction. In addition, wood is used to express its texture rather than its structural qualities.Then, all glazed parts and vertical circulations were made of transparent acrylic. The mat black painted parts strongly contrast with the orange thermo-molded elements or the wood left in its natural color. The interior, meanwhile, is anthracite.

Finally, two transparent acrylic blocks attached to a wooden podium support the model.

To project presentation by Sid Lee: http://sidleearchitecture.com/

 

Marriott Hotel Model - Overall view

Marriott Hotel at Pierre-Elliott-Trudeau Airport in Dorval

PRESENTATION MODEL FOR THE MARRIOTT HOTEL AT PIERRE-ELLIOTT-TRUDEAU AIRPORT IN DORVAL.

 

OVERVIEW:

Date of completion : 2006-2007
Time for completion : 6 weeks
Scale 1:150
Dimensions : 24″ x 30″ x 8″
Materials :  Styrene | Acrylic | Linden Wood | Russian Birch Plywood | LED Lighting

 

DESCRIPTION:

The Marrott Dorval project is located in Montreal, near YUL International Airport. Its design was entrusted to the Montreal firm Provencher Roy Architects. First, the model was commissioned by the architects to present the new project to the Marriott group. Subsequently, the model, which had been displayed in the US arrival area during construction, was relocated to the entrance hall of the hotel. It was designed between 2006 and 2007 and its execution lasted for about 6 weeks. The overall dimensions of the base are approximately 24 x 30 inches.

The model, all elements of which are fixed, is at a scale of 1:150. This scale allows to visualize the implantation of the project in the new United States terminal. The model also allows to convey the integration of the project with the large-scale work undertaken at the Canada-United States customs and border crossings following the reinforcement of security measures after the events of September 11, 2001. Moreover, the interior treatment of the model expresses as much as possible the great transparency of the lobby which is open over the entire height of three floors.

The main materials chosen for this model are styrene, because it has great plastic qualities and the ability to transmit colors faithful to those of the construction, molded acrylic and wood that was used in two ways. On the one hand, it is applied on the model to express its own texture, more than for its structural qualities. On the other hand, it is used for the construction of the context and the site to give a neutral aspect to the environment and bring out the model of the building. Then, all glazed part are made of transparent acrylic and a central LED lighting system is installed in the model.

Finally, the model is protected by a transparent acrylic box. To see the presentation of the project by Provencher-Roy http://provencherroy.ca/

Dominion Bridge Model - Central plaza aerial view

Dominion Bridge Community Development – VillaNova

MODEL OF ENTIRE VILLANOVA COMMUNITY DEVELOPMENT IN LACHINE-EAST IN MONTREAL – DOMINION BRIDGE AREA.

OVERVIEW:

Date of completion : 2015-2016
Time for completion : 16 à 20 weeks
Scale 1 :500
Dimensions : 60″ x 120″ x 4″
Materials : Linden Wood | Acrylic | Russian Birch Plywood | Plants | Liquid Resin | LED Lighting

DESCRIPTION:

This model represents a 52-acre community development in the Dominion Bridge area of Lachine, Montreal. Development Lachine-East commissioned this model to provide a sales tool at the main office of the new development VillaNova. The model was designed between 2015 and 2016 and its execution took approximately 16 to 20 weeks. It’s overall dimension are approximately 60 x 120 inches for a height of 4 inches.

The model is at a scale of 1:500. This large scale makes it possible to represent all the planned development phases in a coherent way. It also allows to locate it within the city. First, the strategy was to build the base of the model with the context of insertion of the project which included the surrounding neighborhoods and a part of the Lachine Canal. Then, the buildings surrounding the project were represented in linden wood in a simplified way to emphasize the project itself while offering a realistic integration in the city.

Conversely, the new buildings were made of sanded acrylic blocks surmounted by linden wood roofs. This made it possible to illuminate them with strips of LED bulbs through openings made in the Russian birch plywood base. In addition, their illumination gives them an appearance that contrasts with the rest of the model.

The entire new development is bustling with the addition of vegetation that helps to give clients insight into the character of real estate development as well as extensive landscaping in the area. Finally, the Lachine Canal and Lac Saint-Louis were painted and highlighted with the use of liquid resin to give depth and some reflections similar to water as well as distinguish them from other surfaces (see: https://villanovacanal.com/).